The Meggitt (Sensorex) SX42891 inclinometer is a self contained angle measuring unit with integrated display.
With its own internal battery (2 x 1.5V AALR6) and LCD, the angle can be directly read either in degrees, mrads, and mm/m.
The four sides can be used as a reference allowing measurements to be made on any vertical or horizontal surface.
A hold button maintains the current display. The auto switch-off function, powered by battery, gives an autonomy of up to 150 hours.
When the battery level is insufficient, this is displayed on the LCD.
Pushing “menu” button will enable the following functions:
- Temperature display
- Inclinometer calibration
- Auto switch-off selection
A zero-reset function allows the user to use any angle within the measurement range as zero reference. The display then shows the difference between the actual inclination and this reference.
The inclinometer SX42891 can also be connected to a PC via a RS232 bus (serial output) available on a Binder connector located on the front panel.
- Machine levelling and setup
- Slope control
- Building and maintenance work